1 / 1
DUMMONEER DJ-1 V1.0 — zdjęcie 1

DUMMONEER DJ-1 V1.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A DJ scene for DUMMY 13

Ocena
5 / 5
Polubienia
50
Pobrania
421
Wydruki
1
Wyświetlenia
1489
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

May, 25., 2024 V1.0:

first release

----------------------------------------------------------------------------------------------------------------

I proudly present the DUMMONEER DJ-1.

A simplified DJ controller based on the PIONEER DDJ-FLX10, designed to fit with DUMMY13.

This is another model from my series "DUMMY 13 - Micirama" (Diorama by Mici).

You will find the upcoming models for this scene here. 

 My themed collections:  /@Mici/collections

----------------------------------------------------------------------------------------------------------------

Printing:

The provided 3MF file can be used with:

  • Orca Slicer/Bambu Studio: Geometries and settings
  • Prusa Slicer: Only geometries
  • Others: May or may not work

The list of the settings is too long to describe for each individual part, but in principle:

  • PLA
  • Nozzle: 0.4mm 
  • Infill: 15%, rectilinear
  • Walls: 2
  • Wall generator: Arachne (a MUST!)
  • Prime tower: Disabled
  • Layer height: 0.16/0.08mm, depending on requirements
  • Layer height range: For all parts, except the feet
  • Colors: Color change by layer
  • Supports: No
  • Brim: No

Assembly:

  • The plates are rotatable but can fall off, so it is better to glue them to the pin
  • The other parts all fit snugly and can be assembled without glue. If not, use glue
  • Make sure you have removed all residues and the runners accordingly
  • The colored buttons can be mixed and matched as desired

Tagi