Centrifuge tube stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This centrifuge tube stand was designed in collaboration with a colleague from the microbiology lab at university zurich
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 286
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This centrifuge tube stand was designed in collaboration with a colleague from the microbiology lab at university of zurich
It has 8 places for different sized centrifuge tubes. The first front row was created for the centrifuge Eppendorf Tubes® BioBased with a volume of 5 ml. The 2nd rear row can be used for the same centrifuge tubes but with a volume of 25 ml or 50 ml.
One requirement for the design was that any labeling on the tubes should always be legible. For this reason, there is an opening that goes right through the holder.
The stand was also developed in such a way that no support material is required. This has the great advantage that there are no sharp edges or openings in the product. In addition, everything has been rounded. The reason for this is, that the product can easily be cleaned with disinfectant. If corners and sharp edges are possible, dirt could accumulate. This is avoided with the curves. The elevations / walls serve to ensure that no liquid or similar can flow from one tube to the other.
Since disinfectants would attack the usual printer material such as PLA, the material PP was chosen, according to a blog entry by Prusa3D.
The stand can be printed in one piece with the Prusa mini. This means that no assembly is required and the stand is ready for immediate use.