1 / 4
Adapter for Decathlon water bags to 3DHydro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this in order to fit the Decathlon water bags to a backpack with a 3DHydro mounting system
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 43
- Wydruki
- 3
- Wyświetlenia
- 417
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (1)Kolekcje (18)Powiązane
Snaps in the 3DHydro mount and the bottom securely grabs the Decathlon water bag. It's got a little lip on the Decathlon side to avoid the bag falling off when handling while empty.
I printed this with :
- Fiberlogy Impact PLA
- 0,2 layers
- 5 walls - 40% gyroid infill
But since it doesn't really bear that much load, I suppose any type of filament should do fine. I'd only avoid normal PLA or PETG because IF it breaks, the sharp shards could damage the backpack and the water bag