Parametric Large Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for Fillamentum 2.5kg spools but can be modified for slightly different spools.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 214
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Made for Fillamentum 2.5kg spools, however, the model is parametrized so you can adjust it to pretty much any spool. It uses regular 608 bearings. Parts are press fit, no screws or glue required.
I recommend printing the bearing rack in the orientation it will be used in. It will require some supports. The print lines should be perpendicular to the load.
If there is some other common large spool size that is slightly different to this, please comment the dimensions of the spool and the manufacturer so I can add it to the files for easier access.
| Manufacturer (weight) | Outer diameter (mm) | Width (mm) |
| Fillamentum (2.5 kg) | 300 | 102 |