1 / 3
Prusa Mk4 Filament Guide to PTFE Tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small adapter to fit a PTFE 4x2mm tube into the standard Prusa MK4 Filament guide arm.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 69
- Wydruki
- 4
- Wyświetlenia
- 920
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 4) (Komentarze: 4)Remiksy (0)Kolekcje (23)Powiązane
I wanted to have a straight PTFE tube from my Drybox towards my Mk4s filament guide.
The PTFE tube adapter I have made fits in the original guide arm and is locked into place like the regular tubes provided.
Adapter pushfits PTFE tubes off OD 8, 6 or 4mm.
There is a smaller part off the tube in the end, this will prevent the PTFE tube from sliding downwards towards the extruder.
Print without supports