1 / 4
SkySword RC Airplane Wall Mount — zdjęcie 1
1 / 4

SkySword RC Airplane Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Preferring to store my RC aircraft this way, I made a wall mount for the 70mm EDF SkySword. The full weight of the…

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Preferring to store my RC aircraft this way, I made a wall mount for the 70mm EDF SkySword.

The full weight of the model is supported from bottom and mine set there perfectly, but I made the upper loop just for extra security. The upper loop doesn't actually contact the model anywhere, I left enough space between model and upper loop bracket to add a thin strip of cushion material if so desired.

Print Settings

Printer:

ANYCUBIC Kossel Linear Plus

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

30%

Filament: inland PLA black


Notes:

Wall thickness .6mm / bed temp 55c / nozzle 225c / shells=5 / 7 top & 7 bottom layers

Category: R/C Vehicles

Tagi