1 / 2
One Piece Vertical Wall Mount Paper Towel Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vertical wall mount paper towel holder that prints in one piece
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 137
- Wydruki
- 3
- Wyświetlenia
- 449
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (0)Kolekcje (11)Powiązane
Due to space constraints, I was looking for a vertical wall mounted paper towel holder. Most of the existing models were printed in multiple parts and required gluing. It occurred to me that it should be possible to print this as a single part with improved strength due to the continuous layer lines. I adapted Dub3D's excellent shelf bracket design to the job and this is what I came up with. Fits the largest mega roll I could find. Works great for me!
Printing Parameters:
- Easily fits diagonally on a 235x235 bed
- PLA seems adequate in this application
- 0.2mm layer height, although 0.3 would be faster and probably stronger
- 5 Top/Bottom shells
- 4 walls
- 10% Adaptive Cubic infill
- No supports needed