Poop Bag Holder for Leash
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poop bag holder intended to be attached directly to your dog's leash.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 318
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is a remix of another great poop bag holder, modified to be attached in line with the leash instead of dangling from it.
To build this you will need 4 heat set inserts that go into the back of the base. These should be M3x5x4 inserts. For example, these Ruthex ones should work well, but if you've built a Voron before, you'll already have these. You should install the heat set inserts with a soldering iron or the tool of your choice. Once you've done this you can attach the base to the leash by screwing the backplate on with 4 M3x12 screws or M3x10 screws. M3x8 will probably work also but won't have full thread engagement.
The cap piece here is included for completeness but isn't changed from the original model. If you've already printed that, you should be able to reuse it.
I've included the Fusion 360 and STEP files if anyone wants to mod this further. The leash width and thickness defaults to 25mm (1 inch) by 2mm but can be changed in Fusion 360 under parameters.