1 / 3
Wet Wipe Holder for Toilet Paper Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wet Wipe Holder for Toilet Paper Stand
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 1087
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
The wet wipes needed a place so I created this holder fitting to the toilet paper stand.
It is a two part print and M3 threaded inserts were used to connect them and also to fastened the holder to the stand.
The holder was printed in PLA.
Print was done with a 0.4mm nozzle, 0.2mm layer height, five outer perimeters and 10% infill. No supports needed.