1 / 4
Watering can spout, fully parametric (Fusion)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple spout for a watering can. It's fully parametric, and you can download the Fusion360 file.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
This is a simple spout for a watering can. It's fully parametric, and you can download the Fusion360 file.
I printed it without supports in PETG (0.6 line width, 0.28 layer height, three perimeters, no infill needed). I set the wall width to 1.8 (three 0.6 walls), but 1.2 will probably work as well. It used about 26g of material (50x50 nozzle, 120mm height, 22.8mm inner diameter).
