1 / 2
Eye of the Universe Stranger Version — zdjęcie 1
1 / 2

Eye of the Universe Stranger Version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Eye of the universe icon from the Echoes of the Eye expansion

Ocena
0 / 5
Polubienia
8
Pobrania
47
Wydruki
0
Wyświetlenia
527
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an icon from the Echoes of the Eye expansion of Outer Wilds. The Fusion 360 source file is attached, which was based on an SVG file from Reddit. I printed mine in white and glow in the dark Overture PLA to use along with some other glowing ceiling stars.

To get these very long spikes to adhere to a smooth PEI bed, I had to lower the first layer print speed from 20 to 10mm/s. If you have bed adhesion issues, a brim can also help keep them stuck down.

Tagi