Original Prusa Enclosure - Slider Lock Latch - Optimised remixed with nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of optimized enclosure slider lock latch by @DavidD to add an M3 metal nut instead of relying on petg threads.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 51
- Wydruki
- 3
- Wyświetlenia
- 244
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Award winning Slider Lock Latch by @MichaelQ was a necessary upgrade to replace the original flimsy locks for the enclosure hinged top lid mod. @DavidD made a slick optimized remix that simplified the print. I printed a set and it worked great, but I found over time the plastic threads stripped and became loose so the eventual wobbling of the case body just really started to bother me. So this remix adds a metal M3 hex nut into the install process to really clamp the latch in place.
What you need (per latch):
- 1x case printed
- 1x cover printed
- 1x slider printed (obtain this file from @DavidD's original files here https://www.printables.com/model/624632)
- 1x M3 hex nut
- 1x M3x8mm screw, although I'm sure different length screws will work as long as it can reach the nut and not too long to punch through the case
Printing:
I printed the parts in PETG with 0.3mm draft settings, MK4 nozzle. All other settings default. By some luck or fluke, the nuts pressed in nice and snug the first time so I didn't mess with it further. Print orientation was done as shown in the attached screenshot without supports. If you're OCD like me, I mirrored the parts to make the right latch mirror the left latch and it also printed fine.
Assembly Instructions:
Press the M3 hex nut into the hex recess in the cover tab. Other than that, remaining assembly is identical to @DavidD's version.