Fractal Design Ridge GPU Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable GPU support bracket for the Fractal Design Ridge computer case.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1576
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The Fractal Design Ridge case uses a GPU riser to mount the GPU in the case. In certain case orientations this can lead to the GPU sagging quite a bit, but there isn't a great place to put in something to prevent the sag unless the GPU is as long as the case. This bracket mounts to 2 of the fan holes that will most likely be unused for a 2+ slot GPU.
Parts:
- 2x M4 x 6.6mm Heat Set inserts
- 1x M4 x 8.1mm Heat Set Inserts
- 1x M4 x 20mm Hex head screw (though really the head type is unimportant
- 2x M4 x ~5mm Philips screw (though the head type is less important than the head height as the clearance in the case is pretty low).
Printed with Overture ASA on Bambu Labs P1S. 0.4mm nozzle, 0.20mm strength profile. (6 wall loops, 50% gyroid infill. Supports for the screw holes and Brim used.)