Conqueror Challenge Medal Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple hanger for your Conqueror Challenges or other medals!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1041
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple hanging mount to display your conqueror challenge or other medals! It has space for 5 medals to be displayed on a wall. It has mounting points for two screws, it is recommended you use drywall anchors if you are not mounting into a stud.
There are two versions - a “Conquered” version with the word Conquered displayed above the medals, and a simple “No words” version which is simply the mounting points for the medals.
If you want to print in two colors, input a color change option in your slicer just after the layer where the horizontal mounting bar finishes printing. There are “2color” GCODE files available for the MK3.9 that are pre-sliced for this color change.
Any standard printing profile should work, I used 3 perimeters, 15% infill, .2mm layer height, and zero supports.
Display your accomplishments with pride!