iGaging DRO Mounting Adapter - New to Old
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a new style iGaging digital readout on an old style mount
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
iGaging is a company that makes DRO style digital read-out measuring devices. iGaging makes an original (older) version and a newer version. Recently I replaced a glitchy old style version with the newer version. Now you might think that since they are both made by the same company, the new version would be backwards compatible with the old style mount system - but you would be wrong!
Since I just wanted to plug the replacement into my old holder (along with some other existing gauges), I made this adapter to go on the back of the new readout, so it will mount on the old style adapter.
Note: The digital readout has mounting magnets on it, so I initially tried just using a steel plate, but the magnets are much too weak. The new version also comes with it's own mounting bracket - not compatible with the older version, of course.
Print Instructions
Print in PLA using the 3mf or gcode files provided. The print should be oriented so that the edge is down on the print bed (see photos).
I used double-sided foam tape to attach the adapter to the back of the digital readout. The adapter simply clicks into the old style mount in the same manner as the older digital read-outs (see photos).
CAD