minicard standee
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for Arkham Horror LCG investigators, but fits others too.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
Standees for Arkham Horror LCG investigator minicards. Inspired by the standees here:
https://www.thingiverse.com/thing:5194218 (AprioriTori)
https://www.printables.com/model/233655-arkham-horror-lcg-investigator-stands (LostPrinter)
Redesigned from scratch with a few improvements:
- larger window to show more art;
- thicker edges for easier printing and more sturdy;
- card edges not visible through window;
- some rounded/chamfered edges.
Inner dimension is 45.6mm x 66.8mm. I chose these so that sleeved or unsleeved minicards work equally well (edges not visible on top or sides, regardless of card position). Freecad file included, so you can adjust measurements in the spreadsheet as you like.
Supports help the top print more cleanly. A thicker support also gives something else to print each layer; otherwise the layers can be too small and filament starts getting too hot. I included a picture with the tree supports I use, but anything similar should do the same job.