The Ring of Onesimus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ring that actually holds a round gem in a channel setting.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was a challenging build for myself considering how small everything was. The ring fits a .5 carot round cut gem or some type of round gem roughly 5mm x 3mm. I happened to have some laying around the house… hence this ring design.
You may need a needle-nosed pliers to set the gem into the fitting, but once set, it appears to hold great.
I love how this turned out, but I would consider smoothing the finished print.
I use cura to slice the ring, and lift the ring .888 off the bed and use a raft adhesion and support touching the plate using ‘lines’. That should get you close to what I have here.
Enjoy.