24oz Mug for shaving or drinking
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print 24oz mug
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This is one of those projects that started off as a modeling exercise and turned into something usable. This mug holds about 3.25 cups of liquid, although 24oz is probably as close as you can get if you figure in ice, etc. When printed at 100% infill, it is absolutely water-tight.
It's big enough to act as a shaving soap mug, if you use Proraso shaving soap. I'm sure it would work fine as a water cup as well, assuming that you use a pigment-free PLA to print it with,you don't put anything hot in it, you don't put it in a dishwasher, and you don't mind a few atoms of lead hitchhiking on the plastic from your hotend.
Instructions
If you intend to make this watertight, print it at 100% infill with 5 extra shells and full supports.
If you don't need it to be water tight, you can get away with 25% infill and 1 additional shell.
If you need to reduce the size of the mug, keep in mind that the wall and bottom thickness is 5mm.
Category: Kitchen & Dining