Adapter for Xaiomi Lightbar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to allow the Xaiomi lightbar to fit monitors with curved backs better. Built in anti-slip. Seamless design.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This adapter is specifically designed to fit the KTC H27T22, since the curved back didn't interface well with the Xaiomi lightbar's mount. It should work well on other monitors with curved backs, although I have not personally tested any.
You must use 3x6mm / 1/4" x 1/8" foam weatherstripping for this design.
Two pieces of 3x6mm / 1/4" x 1/8" foam weatherstripping are needed to ensure the adapter doesn't slide around on top of your monitor. The adapter was designed around the weatherstripping used in the Zero Panels BOM. Simply lay the foam in the built in channels, and cut to the proper length.