Ubiquiti Cloud Gateway Ultra wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount bracket for Ubiquiti Cloud Gateway Ultra
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 216
- Wydruki
- 1
- Wyświetlenia
- 1589
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Wall mount bracket for Ubiquity Cloud Gateway Ultra.
Gateway snaps into base and is held very tight.
Printed on MK4
Layer Height: .20
4 Perimeters
15% or 20% infill (grid). I tested successfully with 15% infill.
No supports needed
Suggest using PETG, or PLA+.
Tabs may be brittle with older filament exposed to humidity.
If you have the Cloud Gateway Max, please look at this model instead:
https://www.printables.com/model/1097862-ubiquiti-cloud-gateway-max-wall-mount
If you prefer to have a printed version of the model, I have an updated printed version
available on Etsy:
https://www.etsy.com/listing/1852748367/ubiquiti-cloud-gateway-maxultra-wall
2024-12-19: Due to some theft of my design, I am changing the license model to no longer allow remix. If you need a change, please feel free to reach out to me.