Drawer Case Strap for Tandem Jerrari GEN2 Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Link two adjacent hanging Jerrari GEN2 drawer cases together for extra stability. Uses the dovetail grooves.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 271
- Wydruki
- 1
- Wyświetlenia
- 963
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
An accessory for the Jerrari GEN2 and GEN2-QL drawer system.
Just a quick part that links two adjacent, hanging drawer cases together for extra stability, particularly when you have 3 or 4 hanging from one another and the dovetail tolerances start to stack enough that things start to wiggle. This doesn’t eliminate all slop, of course, but does tie the two stacks together and prevent them from separating.
Print as many as you need to anchor to your liking. I use two (forward and aft) to join the bottom of a 3- or 4-unit high drawer stack.