Roblox Light Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roblox Light Box using an IKEA Vattensten LED Strip and some superglue.
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 275
- Wydruki
- 2
- Wyświetlenia
- 1892
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Roblox Light Box
Made this for my son, he's really into Roblox (*sigh*) and was asking to build something for him. He already has a keychain on his school-backback so this was a nice surprise for him when he went to bed. I'm not that good at modelling this stuff so improvments are always welcome. Most probably I have to make another one for his nephew so I will update it when I make improvements myself.
Designed using Sketchup, based on the official logo. I used an IKEA Vattensten 1m LED strip inside. The inside for the letters (the 2x thin sheets) is 0.6mm so if you print in 0.2 layers you need 3 layers, it gives a nice faded effect so his room is not too bright. If you want brighter I suggest lowering the model 0.2mm under the build plate in Prusaslicer or split the stl. I used black for the box and white PLA for the inside ‘sheets’
Use superglue to glue everything together but make sure to test fit first. I made everything so you can't go really wrong with the assembly.
Fits perfectly on a Mk4.
Have fun, hope you'll like it!