1 / 4
Track Gear Fidget Toy Print in Place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It works well and prints in place
- Ocena
- 3 / 5
- Polubienia
- 16
- Pobrania
- 154
- Wydruki
- 1
- Wyświetlenia
- 679
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (18)Powiązane
I took a new approach to the gear fidget spinners. This thing is really cool and prints well. The tolerances are 0.4 mm, so most printers can handle that. Also be sure that your first layer is spot on, otherwise it may not spin as freely or the parts may fuse together. It comes off the printer nice and smooth spinning. The 3mf is tuned for Hatchbox PLA on a BambuLab P1S in Orca Slicer. I have included the STL if that is what you prefer. Have fun!
Update: I released a different version of this toy that can be found here.