1 / 5
Ender 3 s1 pro screen holder turned 90° — zdjęcie 1
1 / 5

Ender 3 s1 pro screen holder turned 90°

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Side-facing screen base model

Ocena
5 / 5
Polubienia
6
Pobrania
28
Wydruki
2
Wyświetlenia
166
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I just took the model and cut it, turned it around and fit it so that the screen faces the side. I did it in Prusaslicer so it's very simple. For me it worked. 

0.3mm height; 0.4mm nozzle with 0.8mm of extrusion; 1 wall and 30% infill

Tagi