1 / 8
Heatsink mounts for stepper motors (all Prusas compatible) — zdjęcie 1
1 / 8

Heatsink mounts for stepper motors (all Prusas compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple fixation mounts to add a 40x40x11 (mm) Heatsink on the stepper motors.

Ocena
5 / 5
Polubienia
45
Pobrania
110
Wydruki
3
Wyświetlenia
1023
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I print alot of ASA and it gets very hot inside the enclosure, i wanted to improve the heat dissipation on the stepper motors. 

These mounts/clips i design allow you to fix a simple 40*40*11mm heatsink below the stepper motors. They work for either MK3s/Mk3.5/MK3.9 or MK4 and even MMU3 stepper motors. Pay attention to the names of the files to select your required mounts. Some have different heights and fixation methods to give clearence to the printer to work. In the MK4 X and Y mounts are a bit lower since there are new 0.9 stepper motors. All these clips are designed to fix the heatsink snug with the stepper motor, make sure the mounts are clipping well in the corner of the stepper motors. 

Use the automatic “support on build plate only” with organic supports. I used 3 Perimeters and 30% infill.

DO NOT print these on PLA, Printed them in a more temperature resistant material like PETG, ASA or even PC.

I'm using these 40x40x11 heatsinks Link→ https://bit.ly/4e2YxTJ (You can even choose color to give some extra decor to your machine if you want)

For MK3s/MK3.5/MK3.9 you will need:

  • 3x HeatsinkMount_MK3_Z-Y
  • 2x HeatsinkMount_MK3_X-MMU3-Extruder

For MK4 you will need:

  • 1x HeatsinkMount_MK4_Y
  • 1x HeatsinkMount_MK4_X
  • 2x HeatsinkMount_MK4_Z

For MMU2s or MMU3 you will need:

  • 3x HeatsinkMount_MK3_X-MMU3-Extruder
  •  

If you want to use thermal pads Link → https://bit.ly/3R6NFdL  between heatsink and steppermotor simply scale on Z axis in prusaslicer to until you get the added thickness of your thermal pads.

You don't need to have a Prusa printer to use these clips just check and select the best clip to your situation based on what clearence and type of stepper you have. You can adjust to your specefic height using scale on Z axis.

HeatsinkMount_MK3_Z-Y - 24mm

HeatsinkMount_MK3_X-MMU3-Extruder  - 24mm

HeatsinkMount_MK4_Y - 22mm

HeatsinkMount_MK4_X - 22mm

HeatsinkMount_MK4_Z - 24mm

 

P.S.- The extruder cooler on the pictures of my MK3.5 is not one of these heatsinks. Its this fantastic project “https://www.printables.com/model/61291-prusa-i3-mk3s-extruder-stepper-cooler-add-on-for-4” from @eurad.

 

Tagi