1 / 2
BallBearing spool holder for (Un)orginal Prusa Drybox with counterbored
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Almost the same part but with a counterbored hole in order to use the extra screws supplied by Prusa.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 259
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The mount holes are for original 18mm, bars.
Needs:
- Print 2 x walls by spool
- Buy 4 x ball bearings 608
- Reuse 2 screws M3x10
(Warning: this is not a bone for dogs ;-) )