1 / 7
TCG cardboard storage box template/stencil for MTG, yugioh, pokemon cards — zdjęcie 1
1 / 7

TCG cardboard storage box template/stencil for MTG, yugioh, pokemon cards

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 Templates to alow you to create cardbord sliver boxes for bulk storage

Ocena
5 / 5
Polubienia
145
Pobrania
618
Wydruki
3
Wyświetlenia
4936
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

I like to use the cardboard sliver boxes for TCG storage, but dont seem to be able to buy the single card width boxes any more

These templates allow you to cut out and fold the correct shape from cardboard eg an amazon box. See the photos for guidence on using

Template 1 will just fit on an ender 3 v2 neo when rotated, I include the rotated stencil as an extra file

  1. Place templae 1 on the card, I use an existing fold to start with. Draw around and mark the letters. Also draw along the thin holes inside the stencil
  2. Flip the stencil over and repeat on the other side pf the card, this is the length of the box, and draw around
  3. Now use a ruler to join the points marked with letters, and score along these lines, as they will be folded
  4. Now take stencil 2, and match the two corners marked A, draw around as before, mark the thin lines and the letters. Not you dont need to drown down the left hand side of the stencil
  5. Flip and repeat at the other end of the box
  6. Use a ruler to join the letters.
  7. Now cut round the card where you have drawn. Cut the lines marked cut, and score the lines mark folded
  8. Cut a hole in the box where template 1 has a “tab”, between B&C this will be where the matching tab will fit. It is wise to do this with a knife, not a raggedy mess with a pair of scissors ike I have
  9. Fold your box

Tagi