Fidget Triangle Puzzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little finger-fidget puzzle - can you take it apart? Can you put it back together?
- Ocena
- 5 / 5
- Polubienia
- 429
- Pobrania
- 1955
- Wydruki
- 10
- Wyświetlenia
- 9627
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Share Alike
A simple little puzzle - nothing special but I find myself fidgeting with it when I'm doing other things - hence the title. You'll need to print three of them and they can be made of anything - in the images above I have Silk, Tri-Silk, Wood, Marble, Transparent and PLA+.
Designed in OnShape CAD and printed with Orca Slicer.
Printing
Layer height can be 0.16 or 0.2 mm, and I used 4/4/4 walls/top/bottom.
For strength they need to be printed on their side (ask me how I know this…) so it will need supports. However it doesn't take a lot and I've found that using painted Tree support as follows works pretty well and needs minimal cleanup. I adjusted the support interface to be pretty dense so that it comes off in mostly one piece (in Orca I checked On Build Plate on and set Top Interface Spacing to 0.2mm).
Solution
It's easier to show than to explain - but do try for yourself first!
EdinBearDragon
