Internal Dome Mechanism Mnt @100% +Gear Ring @101.5% +MagMnt @100%
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This for those that need a Gear Ring Scaled to 101.5% to fit their lazy susan's. Want to incorporate both the Internal…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
This for those that need a Gear Ring Scaled to 101.5% to fit their lazy susan's. Want to incorporate both the Internal Mechanism mount and Magnetic Mount at 100% scale. Whole thing then split into pieces. It was a quick and dirty split with innner and outer rings with alignment tabs. Inner to outer are then mated with glue along the perimeter just align slots with inner lobes. In my case Acetone Welded.
Edit: Added a slice of the gear ring portion scaled at 100% for those just wanting a split copy of the whole assy. I've not printed, so no verification done. But should work. Send feedback if it doesn't so I can potentially correct.
Grab the magnetic mount ring from the usual place.
Mr. Baddeley's current designs at: https://www.patreon.com/user?u=4294285
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%ish
Filament: Bambu Lab ABS/ASA
Category: Model Robots