Multicolor Fruit Coasters - No MMU Required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
11 grams of filament, no assembly, and no MMU for these multicolor coasters.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
IMPORTANT: Scale the dragonfruit coaster 80mm on X axis if you would like to use the layer pause timings!
These are coasters shaped like fruits, one watermelon, one dragonfruit, and one kiwi. These do not require an AMS or MMU, but an AMS or MMU can be used to not need to switch filaments mid print. They take around an hour each to print out of some generic PETG on a FlashForge AD5M, but can easily print in under 20 minutes if you are using high speed PLA.
Print Settings:
- Material: PETG (PLA would work better, I just didn't have enough colors)
- Nozzle size: 0.4
- Layer height: 0.2 (Important if you want to use pause layers below)
- Infill: 20%
- Walls: 3
- Top/Bottom layers: 3
- Support/Brim: No.
- USE A SMALL PURGE TOWER! (helps with color switching)
Pause layers (if using 0.2mm layer height)
Watermelon:
Start: Base color (green)
Layer 11 beginning: Rind color (white)
Layer 13 beginning: Fruit color (red)
Layer 15 beginning: Seed color (black)
Dragonfruit:
Start: Base color (purple/pink)
Layer 11 beginning: Fruit color (white)
Layer 14 beginning: Seed color (black)
Kiwi:
Start: Base color (light green/yellow)
Layer 11 beginning: Inside (?) color (bright green)
Layer 12 beginning: Seed color (black)
Layer 14 beginning: Center color (same as base for me, maybe change?)