M8 Wing Bolt and Attachable Washer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed this bolt for my miter saw crown stops. Includes a variety of bolt lengths ranging from 5mm to 100mm.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I designed this bolt to go with my miter saw crown stops:
Included parametric file can be modified to create other sizes of bolts.
The flat channel down the center of the bolt allows it to be removed with a flathead screwdriver if the head of the bolt were to snap off.
The included washer can be glued onto the bolt.
If you'd rather use a flat detached washer you can use these:
Metric Fender Washer Set M3 M4 M5 M6 M8 M10 M12
or these (smaller):
Printing Instructions
For best results print the bolt in its default orientation laying flat.
If the end of the bolt lifts off the bed, cooling may need to be reduced.