1 / 3
Lens board for 'Baby' Graflex 2x3, Copal 0 and Copal 1 holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New & better design. Hole diameter 34,7mm and 41.8mm for Copal 0 and Copal 1.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (11)Powiązane
I have redesigned the lens board, to be more tough (thick).
I've also added a small hole on the back side, some shutters do have this option (prevents rotation). Print nicely from PLA (0.2mm with outer brim also - can help), I can reccommend also stronger plastic in case your lens is heavier.
If you need some special hole, let me know in comments - I'll design & upload.
Thanks for looking!