top bar for kobra 2 & kobra 2 pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
upgraded top bar for anycubic kobra2 & kobra2 pro
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 972
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
top bar for Anycubic kobra 2 & kobra 2 pro, may fit a kobra 1 but i dont have one to measure
color co-ordinate your printer, looks great, has 6 holes in top for m3 knurl nuts in-case you want to add accessories
use stl “kobra 2 top bar plasticBurners 3D” for stock with link belt in place
use stl “kobra 2 top bar plain” if you run dual z steppers or are happy to lower the belt idlers by 4 mm
print on face, no supports needed, i recommend 50-60% infill
5 walls, 5 top, 5 bottom
i prefer to print in petg or abs but pla should be fine for this part
make sure your end printed measurements are the same as the stl measurements
Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)