Neptune 4 / Pro 3x5015 Threaded inserts, HalfManBear mods + KUSBA + BEACON
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Neptune 4 / Pro 3x5015 fan Shroud Threaded inserts, HalfManBear mods + KUSBA + BEACON MOUNT
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 1024
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
merging together a bunch of print heads to get all the features I wanted here is a list of what I want from this print head
kubsa mount
3x 5015 fans
beacon mount
threaded inserts
Update Aug 7,
FINALLY actually printed this. I used:
6x m3 threaded inserts
6x20 m3 screw
2x6 m3 screws for the led (note I used one m3x10 screw and it was too long and then forgot to change it as well as add a second screw)
For the beacon I used the stock screws and screwed it directly into the plastic
Plans for the future:
I want to make a better version to eventually print in PETG I've been printing mostly in PLA because petg was giving me issues with blobbing. Features to add are:
- Bowden/PTFE fitting built into print head
- Optimize wire routing, I want to be able to swap fans without a full disassembly
- 60mm fan from the main board to replace the heat break 5050? Maybe¿
- Stiffen the print head, might just be cause of the linear rail mod but it just feels like it should not flex at all
If you have anything you want me to change just leave a comment or DM me