Magnetic item / necklace holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic item / necklace holder for metal-backed dry erase boards and refrigerators
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
My daughter wanted something to hang her necklaces from, and her desk has metal-backed dry erase panels on the walls of the hutch, so I designer these little magnetic push pin style necklace holders. They have a groove to help keep a necklace on them, and can also be used as a “push pin” on a metal backed dry erase board or other metal surface, such as a refrigerator, to hold papers or pictures in place. I used 3mm high x 6mm diameter magnets that I found on Amazon. The magnets press fit into the hole in the bottom, but depending on how your printer is calibrated, might need some glue to keep them in place.
I printed these at 5 top layers, 4 bottom layers, 2 perimeters, 15% infill - PLA is about 11 minute print, so I usually print 6 or so at a time.