1 / 3
Bobovr S3 Pro Koss Sound Mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Koss Porta Pro Sound mod for Bobovr S3 Pro
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 839
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried different sound mods but none worked well for me so i made a 360° Rotating Base for this one Quest 3 Koss Headphone Mount (with Elite Strap) by AlFlo3D - MakerWorld.
The Base replaces a cover one the S3 Pro.
- Unscrew the Cover (see Picture)
- Print both parts - I did 0.2mm, 15% infill without supports
- Print all parts from the original except Clip 11 and Piston Mount 11
- Beware that the Print in Place part needs to get loosen with a small plier so it rotates - see red arrow
- Insert Arm Holder to the slot and glue it in
- Install the Parts from the Original
- Install mod on S3 Pro
- Done
I added my F3D File - beware i never use Fusion 360 or do 3D Modelling and building this costed me a huge amount of time but it somehow worked. But the file is a pure mess haha.