Velcro Strap Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Velcro Strap Mount I needed something that would hold my velcro straps to my DIY lithium battery so I came up with this.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Velcro Strap Mount
I needed something that would hold my velcro straps to my DIY lithium battery so I came up with this simple holder.
The slot is 3mm x 15mm and should fit most common velcro cable straps.
You can either use the little precut pieces of double sided squares you can find at your local hardware store or just cut a section of 1" wide double sided tape.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.3
Infill:
100%
Notes:
Print it vertically for more strength along the slot.
Category: Organization