Camlock Inlet/Outlet for Cyclone Separator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Camlock female threaded inlet/out utilizing Pete H's camlock system for Dronnn's cyclone separator on Thingiverse.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 1169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are female threaded inlet and outlet made for Dronnn's cyclone separator. https://www.thingiverse.com/thing:2829268
I chose to go with female threads since it offered more flexibility for the oddball collection of hoses that I have accumulated over the years. Easy enough to install Peter H's threaded male camlock as needed.
The outlet is generic and can be mounted on any flat surface. The inlet is specific to the inlet geometry of this filter.
Printed on Ender 3 S1 Pro at .2mm layer and 10% infill. Used Sunlu PETG and stuck it on the cyclone with JB Weld original.