Bird Buddy end cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
OpenScad, replaces original end cap and perch in case of loss/damage
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Somebody chomped our feeder end cap and tore it off the feeder, so I threw together something in Openscad. It doesn't have all the fancy hook/eye bits that the original did, just a big groove that press fits onto the remaining bits sticking out from the feeder tray. So you'll want at least outdoor tape and maybe some caulk to hold this in place. It has holes to fit 5mm screws for a perch or other accessories, and you can add more holes or attached bits if you want. (The extended perch in the photo is not part of this file, it's from <https://www.printables.com/model/361344-bird-buddy-front-perch> I think)