1 / 16
atmel ice case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a low profile case for the atmel ice programmer (bare board)
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 387
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Use this to enclose your bare “ATATMEL-ICE-PCBA” or take the board out of the regular housing and enjoy a low-profile, clean look. Why use light pipes? Because light pipes are awesome. That's why. Why does the AVR logo look lame? It doesn't if you look at it from across the room and squint. Uses the following parts …
- McMaster-Carr 93365A110 (#2-56 heat set insert)
- McMaster-Carr 91771A104 (#2-56 x 5/16" flat head machine screw)
- Bivar PLP2-125 (light pipe)
Created with SolidWorks 2024. FYI, the AVR text is in the logo 3MF, not the STEP. The logo 3MF's were created with bambu studio. the non-logo 3MF is just a file export and will likely work best.