Bambu AMS A_B Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An A/B switch that allows a twist of a knob to switch an AMS between the two printers.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 213
- Wydruki
- 0
- Wyświetlenia
- 1263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I have 3 AMS units and 2 printers. This A/B switch allows me to simply twist a knob to switch an AMS between the two printers. When I flip the switch, the target printer automatically detects the newly attached AMS, and scans its spools. Full assembly instructions are in the AMS A_B Switch Build Notes PDF file.
You cannot switch a shared AMS if either printer is printing. Disconnecting an AMS (even if it is not being used) from an active printer may kill a print, by corrupting the communications protocol between the printer and the AMS. And if the shared AMS is switched to a printer that is printing, it will not be recognized until after the print ends.
USE AT OWN RISK! Wiring this wrong can take out your printer! I've made 2 of them and both work great. Be sure to use a meter to check, then recheck, all connections before using.
A Bambu Studio .3MF file is included. It includes Plates, so it will generate errors when loaded by PrusaSlicer.
Supports are needed, but be sure to disable any supports in the 3 PTFE Clip holes. It is not needed in the holes and is really hard to get out.