1 / 3
IKEA MALM LIVBOJ Wireless Charger Nightstand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very basic design I knocked up in order to be able to easily use the LIVBOJ wireless charger on the side of…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This is a very basic design I knocked up in order to be able to easily use the LIVBOJ wireless charger on the side of a new-ish (2023) MALM bedside.
It should be wide enough to accomodate most USB-C cables as I tested with the widest ones I had on hand.
Print face-down with supports in whatever filament you have on hand. I use Polymaker PolyLite PETG just because it's what I had loaded in.