Lamp #43 - Kumiko Hemp Leaf Shoji Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is remix of the Lamp #35 - Shoji Tall 200 mm which removes the need of M3 inserts, screws, changes screens
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 687
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This take reduces the number of base pieces from two to one. The base no longer requires M3 inserts, M3 screws, or M12 nuts.
Due to the higher density of the Hemp Leaf shade, I also relaxed the printing requirements of the screen and using a lighter material allows the usage of a lower watt bulb.
The Shade measures 200 mm height x 108 Width
Lamp with walls, base and top:
250 mm height by 150 mm width
Print 4 of the walls and 1 of the base and top piece and the shade.
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.amazon.de/dp/B0B5MPL9MX
The slicer settings for the base and e14 short neck:
.20 mm Standard
(All standard settings and speeds, Aligned seam settings)
Filament: Eryone Matte PLA+ Black
The slicer settings for the 4 walls and top pieces
.20 mm Standard
(All standard settings and speeds, Aligned seam settings)
Filament: Eryone Matte PLA+ Black
The slicer settings for The Shade:
Filament: Sunlu PLA+ White
.20 mm Standard
Infill % - 100 , Rect
Wall Loops - 8
Top Shell - 5
Bottom Shell - 8
Seam Position- Aligned