1 / 7
Meanwell LRS-35 Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the powersupply LRS-35 by Meanwell.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a case for the Powersupply Meanwell LRS-35.
The PSU fits well into the case and can be attached to the side with two M3 screws. The lid is also secured with 4 M3 screws.
Recesses for cable ties are integrated into the 3D print for strain relief so that the power cables are firmly connected to the housing.