Original Prusa Enclosure (OPE) - Reverse Slit Cover / Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cover / plug is placed over the perforation, reverse from the slit.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
There are some models where the perforation in the profiles can be covered from the outside.
This model can be used to cover the perforation in the profiles from the inside. Or if you use the hinged lid with your Prusa enclosure from the top.
You can also use it to cover the tree perforation in the bottom plate of the enclosure from the inside.
The advantage of this cover is that if it is attached to the bottom plate from the inside or from the top of the hinged lid, it will not fall out so easily due to vibrations.
Use PETG or ASA, PLA could be too stiff and break when inserting the cables.
The models are created with FreeCAD 0.21.2