Bump Key Hammer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm now selling these on my site and they have replaceable heads!!! https://www.3dlocksport.com/products.php#!/Bump-…
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 230
- Wydruki
- 0
- Wyświetlenia
- 1052
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm now selling these on my site and they have replaceable heads!!! https://www.3dlocksport.com/products.php#!/Bump-Hammer/p/155651360/category=39551008
I bought a Sparrows Bump Key Hammer. It is a great piece of equipment. I wanted to see if I could replicate it and make one cheaper. From Sparrows the cost of the hammer is about $12 USD. This hammer costs about $5 USD in materials to make.
See a video of me using it here:
If you are looking for the mini version it is here: https://www.thingiverse.com/thing:2707828/
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
No
Supports:
No
Layer Height 0.1mm
Infill:
100%
Notes:
I printed this with a 4mm brim.
Post-Printing
Nothing Much To Do!
I just had to trim off the brim. If you don't print with a brim, then there is no post-printing work to be done.
How I Designed This
I just had to trim off the brim. If you don't print with a brim, then there is no post-printing work to be done.
I designed the whole thing in Tinkercad
Category: Tools