Original Prusa Enclosure (OPE) - Cable Managemet Clips for Under the Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Instead of having to pull all the cables through the enclosure, lay them under the enclosure.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 275
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Fastening cables with ties inside the enclosure is impractical for maintenance. It also makes less sense to pull all cables through the enclosure if the cable is only connected to components outside.
This clip allows you to place the cables under the enclosure. The clip is minimalistic, but does the job.
Use the screw connections of the profiles with the bottom plate for the clip. However, 8 mm screws are now required instead of 6 mm.
In the photos, there are 5 cables in the clips: The power cable for the Raspi 4 and the Prusa enclosure add on board, 2 USB cables (printer and camera) and an Ethernet network cable.
Use PETG or ASA, PLA could be too stiff and break when inserting the cables.
The model is created with FreeCAD 0.21.2