Blackstone Better Paper Towel Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement paper towel holder for the blackstone grill to prevent the wind taking off with your paper towels.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 1084
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I was tired of the wind taking off with my paper towels, so i decided to design a new paper towel holder to prevent this.
This is a work in progress and i have not had the chance to test print this yet or to find the correct spring (although i have an assortment spring kit from Menards that looks promising).
The fasteners for this project are M5 Lock nuts (necessary so you can fasten it together without it being to tight that it restricts the lever movement) and M5 30mm bolts. The spring in the model was just for picture purposes, but provided a link to the spring used in the model below if your feeling adventurous.
As for the mounting to the blackstone, It uses the same mounting holes as the original blackstone paper towel holder. It would be the same thread bolt but the length is obviously different. Since i have not printed this yet, i have not been able to validate the hole placements nor have i checked the existing black stone bolts. Will update this in the future when ive had the opportunity to test print it.
If anyone is wanted to test print this, id greatly appreciate the feedback.
Bolt - https://www.mcmaster.com/94500A301/
Lock Nut - https://www.mcmaster.com/90631A113/
Spring - https://www.mcmaster.com/3630N421/ (Use this spring at your own risk, have not tested this spring, just used for modeling purposes)