Scribe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The scribe is used to trace the contour of either an inside corner or an outside corner.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
scribe.scad and scribe.stl
The scribe can be used to mark inside or outside corner contours. An example of an inside corner would be fitting a counter top to an undulating wall. Ride the cylinders, oriented up, against the wall with a pencil inserted into a hole chosen according to the amount of counter you need to remove. Examples of outside corners would be a table top or the front of a guitar. Ride the cylinders, oriented down, along the edge to mark a contour a consistent distance from the edge. The .stl provides one version of the tool, but the included .scad file may be modified as needed.