Wyrmspan Cave Card Sleeve Trim Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small guide to use with scalpel blade (works fine with Stanley blades) to trim sleeves for Wyrmspan Cave Cards. Use…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
A small guide to use with scalpel blade (works fine with Stanley blades) to trim sleeves for Wyrmspan Cave Cards.
Use Sleeve Kings SKS-8808 sleeves, this will trim them down to fit ~ 59 mm x 57.5 mm cards (i.e. cave cards with a little extra at the open end).
You need to measure if your blade will fit 0.6mm groove.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
gyroid
Filament: N/A PLA
black How I Designed This
Inspired By
I'd meant to print out https://www.thingiverse.com/thing:4674521 ever since seeing it, but never got around to it. I was given the opportunity to sleeve Wyrmspan for a friend's birthday present and discovered that there aren't any currently available sleeves for the cave cards.
The cave cards are the same width as the dragon cards, where I'm using Sleeve Kings SKS-8808 sleeves, just square. I decided I'd just trim down the 8808 sleeves to suit the square cards so built a simple trim guide in TinkerCAD using the concept of the Everdell trim guide.Category: Toy & Game Accessories